The first thing you will need to do if you are removing and restoring water damage in Arlington, VA on your own is to locate where the damage is coming from and stop it at its source as soon as possible. Failure to do this will make everything else you do in the process counterproductive.
If the water leak is coming from a pipe you will likely have to stop the flow from an on street source or well pressure tank. Street pipes can be difficult to locate so if you don’t know where the main line is call your local water service and they can direct you on where to locate it.
If the water damage is surfacing from the roof generally you can buy a tarp or lay sturdy plastic on top of the roof to stop additional water from coming in. This is only a temporary fix however and you will need to make repairs sooner rather than later; but for an immediate solution this will help short term.
If flooding in Arlington, VA is the issue then you should go to a home repair store and purchase bags of sand to place around the parameter of your house. This will soak up the rain that is there now as well as additional rain that falls.
The obvious next step is that you have to remove the water that has already made its way into your home or property and this is a daunting task. If the leak is small then placing towels about the rooms to absorb the water will suffice, but most leaks are far more severe and in those cases a water vacuum is usually necessary.
Share this post: